NSN 2920-00-999-6572 · NIIN 009996572 · FSC 2920
NO DASHES 2920009996572
In Stock
GENERATOR,ENGINE ACCESSORY
Engine Electrical System Components, Nonaircraft
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ANTX | DISTANCE FROM END TO KEYWAY CENTER | INCHES NOMINAL 1.726 |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.625 |
| ELEC | VOLTAGE IN VOLTS | 24.0 |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 60.0 |
| BCGN | GROUNDING METHOD | INTERNAL |
| BCGS | SHAFT DRIVE END STYLE | |
| AFYS | KEYWAY LENGTH | INCHES NOMINAL 0.750 |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | INCHES MINIMUM 3.740 AND INCHES MAXIMUM 3.760 |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | INCHES NOMINAL 3.750 |
| AXHX | GROUND POLARITY TYPE | NEGATIVE |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.451 AND INCHES MAXIMUM 0.463 |
| BZRR | THREAD SERIES | UNF |
| CFHL | THREAD CLASS | 2A |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CMLL | MOUNTING HOLE THREAD DIAMETER | INCHES NOMINAL 0.375 |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 16 |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.781 |
| ABFF | FURNISHED ITEMS | BOLT AND LOCKWASHER AND WOODRUFF KEY |
| ABPT | SECOND STEP DIAMETER | INCHES NOMINAL 0.874 |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | INCHES MINIMUM 7.180 AND INCHES MAXIMUM 7.260 |
| ABRR | KEYWAY WIDTH | INCHES NOMINAL 0.156 |
| ABVA | UNTHREADED PORTION LENGTH | INCHES NOMINAL 1.320 |
| ADER | MOUNTING STYLE | |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | INCHES MINIMUM 8.480 AND INCHES MAXIMUM 8.560 |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 0.0 |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 180.0 |
| ADZC | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.