NSN 2920-01-030-4238 · NIIN 010304238 · FSC 2920
NO DASHES 2920010304238
In Stock
GENERATOR,ENGINE ACCESSORY
Engine Electrical System Components, Nonaircraft
Application: DECONTAMINATING APPARATUS POWER DRIVEN SKID-MTD, M12A1.
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABPT | SECOND STEP DIAMETER | INCHES NOMINAL 0.874 |
| ADER | MOUNTING STYLE | |
| AGAV | END ITEM IDENTIFICATION | DECONTAMINATING APPARATUS POWER DRIVEN SKID-MTD, M12A1. |
| AHZV | SUBMERSIBILITY | SUBMERSIBLE |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.625 |
| AXHX | GROUND POLARITY TYPE | NEGATIVE |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 8000 |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 100.0 |
| BCGG | MINIMUM CURRENT CUT-IN SPEED IN RPM | 1500 |
| BCGM | RECTIFIER LOCATION | INTEGRAL |
| BCGN | GROUNDING METHOD | INTERNAL |
| BCGS | SHAFT DRIVE END STYLE | |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | INCHES NOMINAL 3.900 |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | INCHES NOMINAL 3.900 |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 0.0 |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 180.0 |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | INCHES NOMINAL 3.880 |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | INCHES NOMINAL 5.210 |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.520 |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 12000 |
| BZRR | THREAD SERIES | UNEF |
| CFHL | THREAD CLASS | 2A |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CMLL | MOUNTING HOLE THREAD DIAMETER | INCHES NOMINAL 0.500 |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 13 |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| ELEC | VOLTAGE IN VOLTS | 24.0 |
| FEAT | SPECIAL FEATURES | WEAPON SYSTEM ESSENTIAL |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 683761C91 | 29510 |
| M683761C91 | 31007 |
| N-1026 | 76761 |
| N1026-1 | 76761 |
| M683761C91 | 92679 |