NSN 2920-01-210-3268 · NIIN 012103268 · FSC 2920
NO DASHES 2920012103268
In Stock
GENERATOR,ENGINE ACCESSORY
Engine Electrical System Components, Nonaircraft
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASA | THREAD LENGTH | INCHES NOMINAL 0.880 |
| ABPT | SECOND STEP DIAMETER | INCHES NOMINAL 0.089 |
| ABVA | UNTHREADED PORTION LENGTH | INCHES NOMINAL 1.150 |
| ADER | MOUNTING STYLE | |
| AJAF | UNPACKAGED UNIT LENGTH | INCHES NOMINAL 9.870 |
| AJAH | UNPACKAGED UNIT HEIGHT | INCHES NOMINAL 9.490 |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.620 |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 1000 |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 100.0 |
| BCGS | SHAFT DRIVE END STYLE | |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | INCHES NOMINAL 4.090 |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | INCHES NOMINAL 4.250 |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | INCHES NOMINAL 4.040 |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | INCHES NOMINAL 5.100 |
| BCMG | TOP MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.510 |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.500 |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 5000 |
| BZRR | THREAD SERIES | UNF |
| CFHL | THREAD CLASS | 2A |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| ELEC | VOLTAGE IN VOLTS | 24.0 |
| ZZZV | FSC APPLICATION DATA | ENG ELEC SYS COMP,NONAIRCRAFT |