NSN 2925-00-881-0164 · NIIN 008810164 · FSC 2925
NO DASHES 2925008810164
In Stock
GENERATOR,ENGINE ACCESSORY
Engine Electrical System Components, Aircraft Prime Moving
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BCGM | RECTIFIER LOCATION | INTEGRAL |
| ABGC | SLOT WIDTH | INCHES MINIMUM 0.400 AND INCHES MAXIMUM 0.430 |
| ADER | MOUNTING STYLE | |
| AAUH | SPLINE MINOR DIAMETER | INCHES MINIMUM 0.655 AND INCHES MAXIMUM 0.665 |
| ELEC | VOLTAGE IN VOLTS | 28.0 |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| AKAE | MAXIMUM OPERATING ALTITUDE RATING | FEET 20000.0 |
| ABGD | SLOT LENGTH | INCHES MINIMUM 1.1985 AND INCHES MAXIMUM 1.2255 |
| ABSA | SPLINE QUANTITY | 6 |
| ABUH | MOUNTING HOLE RADIUS | INCHES NOMINAL 2.500 |
| BCGG | MINIMUM CURRENT CUT-IN SPEED IN RPM | 2000 |
| ATPP | SLOT QUANTITY | 6 |
| BCGN | GROUNDING METHOD | EXTERNAL |
| BCGS | SHAFT DRIVE END STYLE | |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 4000 |
| AXFH | SPLINE LENGTH | INCHES MINIMUM 1.450 AND INCHES MAXIMUM 1.460 |
| AXHX | GROUND POLARITY TYPE | NEGATIVE |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 2650 |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES MINIMUM 0.848 AND INCHES MAXIMUM 0.850 |
| AAUK | SPLINE WIDTH | INCHES MINIMUM 0.204 AND INCHES MAXIMUM 0.207 |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 100.0 |
| AKCT | SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| DGH212-1A | 07639 |