NSN 2945-01-454-5720 · NIIN 014545720 · FSC 2945
NO DASHES 2945014545720
In Stock
FILTER ELEMENT,FLUID
Engine Air and Oil Filters, Cleaners, Aircraft Prime Moving
Application: F18 E/F
Technical characteristics
11 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADAR | BODY OUTSIDE DIAMETER | INCHES MAXIMUM 3.226 |
| ADAU | BODY HEIGHT | INCHES MAXIMUM 6.650 |
| ADNQ | DIFFERENTIAL PRESSURE | POUNDS PER SQUARE INCH (PSI) 180.0 |
| AGAV | END ITEM IDENTIFICATION | F18 E/F |
| AZKQ | TEMP RATING | FAHRENHEIT MINIMUM -40.0 AND FAHRENHEIT MAXIMUM 220.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | FILTER, FLUID, LIQUID COOLING SYSTEM |
| FEAT | SPECIAL FEATURES | OPERATING ALTITUDE: SEA LEVEL TO 70,000 FEET; RATED FLOW: 7.25 GPM AT 4.5 PSID MAXIMUM WITH CLEAN ELEMENT AT 70 DEGREES FAHRENHEIT; FLUID MEDIA: COOLANT FLUID PER BOEING-ST LOUIS MATERIAL SPECIFICATION MMS 654; FILTER ASSEMBLY RELIEF VALVE: CRACKING PRESSURE: 9 PSID, + OR - 1; LEAKAGE UP TO 7.2 PSID SHALL NOT EXCEED 4CC PER MINUTE; RATED FLOW SHALL OCCUR AT A PRESSURE DIFFERENTIAL BETWEEN INLET AND OUTLET PORTS NOT EXCEEDING 14.4 PSI; RELIEF VALVE RESEAT PRESSURE SHALL BE 5.8 PSI OR ABOVE; OPERATING PRESSURE: 150PSIG; PROOF PRESSURE: 225 PSIG; BURST PRESSURE: 375 PSIG; ELEMENT DIFFERENTIAL: 180 PSIG, NO COLLAPSE OR PERMANENT DEFORMATION |
| SFTT | SURFACE TREATMENT | BODY ENAMEL |
| SPCL | SPECIAL TEST FEATURES | FINISH: THE GENERAL EXTERIOR FINISH OF THE FILTER SHALL BE 1 COAT OF MIL-P-53022, TYPE II, EPOXY PRIMER AND 2 COATS OF MIL-PRF-85285, TYPE II, POLYURETHANE ENAMEL APPLIED PER PS 13630; ALTERNATELY THE FINISH MAY CONSIST OF 1 COAT OF MIL-P-23377 EPOXY PRIMER AND 2 COATS OF MIL-C-83286 POLYURETHANE ENAMEL APPLIED PER PS 13630; COLOR SHALL BE WHITE; COLOR NUMBER 17925 PER FED-STD-595 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BODY MIL STD SINGLE TREATMENT RESPONSE -IL-RF-85285 AND MIL STD SINGLE TREATMENT RESPONSE -IL--53022 |
| SUPP | SUPPLEMENTARY FEATURES | APPROXIMATE UNIT WEIGHT: 2.20LBS |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 7M1113-1 | 76301 |
| 436698 | 13520 |
| AD-C136-12 | 18350 |