NSN 3120-00-215-1716 · NIIN 002151716 · FSC 3120
NO DASHES 3120002151716
In Stock
BEARING,SLEEVE
Bearings, Plain, Unmounted
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | OUTER LAYER STEEL COMP 1010 |
| ABGD | SLOT LENGTH | FIRST INCHES MINIMUM 0.2780 AND INCHES MAXIMUM 0.2820 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.8070 AND INCHES MAXIMUM 1.8170 |
| ADAR | BODY OUTSIDE DIAMETER | INCHES MINIMUM 2.4880 AND INCHES MAXIMUM 2.4920 |
| MATT | MATERIAL | INNER LAYER COPPER ALLOY |
| MATT | MATERIAL | LUBRICATION OIL LUBRICATING |
| ABGC | SLOT WIDTH | FIRST INCHES MINIMUM 0.2500 AND INCHES MAXIMUM 0.2520 |
| BZLX | CORNER SHAPE | INSIDE RIGHT CORNER CHAMFERED |
| CTMQ | SURFACE GROOVE LOCATION AND QUANTITY | INTERNAL 1 |
| BZLX | CORNER SHAPE | OUTSIDE RIGHT CORNER SQUARE |
| CTJM | ANTIROTATION/LUBRICATION TYPE AND QUANTITY | HOLE 1 AND SLOT 1 |
| STYL | STYLE DESIGNATOR | |
| AAUB | HOLE DIAMETER | SECOND INCHES NOMINAL 0.2520 |
| AAUB | HOLE DIAMETER | THIRD INCHES NOMINAL 0.3120 |
| BZLX | CORNER SHAPE | OUTSIDE LEFT CORNER SQUARE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER LAYER FED STD SINGLE MATERIAL RESPONSE 66,AISI TO SAE-1010 |
| SFTT | SURFACE TREATMENT | OVERALL TIN |
| AAUB | HOLE DIAMETER | FIRST INCHES NOMINAL 0.2500 |
| ADAS | BODY INSIDE DIAMETER | INCHES MINIMUM 2.3240 AND INCHES MAXIMUM 2.3270 |
| AGKH | LUBRICANT ACCOMMODATION STYLE | |
| BZLX | CORNER SHAPE | INSIDE LEFT CORNER CHAMFERED |
Supersedes
This item replaces cancelled NIINs 005330642 · 007372568. An older drawing citing one of those numbers resolves here.