NSN 2990-00-316-4926 · NIIN 003164926 · FSC 2990
NO DASHES 2990003164926
In Stock
MUFFLER,EXHAUST
Miscellaneous Engine Accessories, Nonaircraft
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ARNA | COOLANT TYPE | WATER |
| ARWJ | WATER INLET FLANGE BOLT HOLE SPACING | 6.562 IN BC DIA |
| ARWK | WATER INLET FLANGE BOLT HOLE QUANTITY | 8 |
| ARWL | WATER INLET FLANGE BOLT HOLE DIAMETER | INCHES NOMINAL 0.562 |
| MATT | MATERIAL | LOCATION NOT OTHERWISE SPECIFIED STEEL CORROSION RESISTING |
| ARTN | OUTLET FLANGE MOUNTING HOLE DIAMETER | FIRST OUTLET INCHES NOMINAL 0.812 |
| ARNG | BODY SHAPE | ROUND |
| ARNH | OPERATING POSITION | UNIVERSAL |
| ARNJ | INLET LOCATION | OFFSET IN END SECTION OF BODY ABOVE CENTERLINE SINGLE INLET |
| ARNK | INLET PROJECTION LENGTH | SINGLE INLET INCHES NOMINAL 3.500 |
| ARWF | WATER INLET LOCATION | ON SIDE IN END SECTION OF INLET |
| ARWH | WATER INLET FLANGE SHAPE | ROUND |
| APGF | DESIGN TYPE | WET |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 78.000 |
| ABTH | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES | .062 IN. BOLT CIRCLE DIA |
| ACQW | INLET CONNECTION TYPE | SINGLE INLET FLANGE |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 33.750 |
| ARTT | OUTLET FLANGE MOUNTING PROVISION SPACING | 16.062 IN. BOLT CIRCLE DIA FIRST OUTLET |
| ARWE | WATER INLET CONNECTION TYPE | FLANGE |
| ARTL | OUTLET FLANGE SHAPE | FIRST OUTLET ROUND |
| ARTM | OUTLET FLANGE MOUNTING PROVISION AND QUANTITY | FIRST OUTLET HOLES 18 |
| ARTK | OUTLET PROJECTION LENGTH | FIRST OUTLET INCHES NOMINAL 3.500 |
| ARTH | OUTLET CONNECTION TYPE | FIRST OUTLET FLANGE |
| ARTJ | OUTLET LOCATION | OFFSET IN END SECTION OF BODY BELOW CENTERLINE OPPOSITE END OF INLET FIRST OUTLET |
| ARNN | INLET FLANGE MOUNTING HOLE DIAMETER | SINGLE INLET INCHES NOMINAL 0.812 |
| ARNT | INLET FLANGE MOUNTING PROVISION SPACING | 16.062 IN. BOLT CIRCLE DIA SINGLE INLET |
| ARNM | INLET FLANGE MOUNTING PROVISION AND QUANTITY | SINGLE INLET HOLES 18 |