NSN 6105-00-885-6517 · NIIN 008856517 · FSC 6105
NO DASHES 6105008856517
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 3 |
| CWDY | TEMP RATING | OPERATING CELSIUS 40.0 AND AMBIENT CELSIUS 40.0 |
| AXGY | MOUNTING METHOD | FACE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 3 |
| BFMF | COOLING METHOD | FAN COOLED |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| BTBY | SHAFT END STYLE | |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 0.0057 |
| ANPZ | ENCLOSURE FEATURE | OPEN PROTECTED |
| AXCP | WINDING TYPE | INDUCTION-SHADED POLE |
| AAJU | OVERALL LENGTH | INCHES 6.000 |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | INCHES 3.188 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | IDENTICAL ENDS INCHES 1.312 |
| FAAZ | PHASE | INPUT SINGLE |
| FEAT | SPECIAL FEATURES | SHAFT END STYLE A5 EXCEPT ADDITIONAL FLATS LOCATED EACH SHAFT AT 90.0 DEGREES |
| FREQ | FREQUENCY IN HERTZ | 50.0 OR 60.0 |
| ABXQ | FLATTED PORTION LENGTH | IDENTICAL ENDS INCHES NOMINAL 0.7500 |
| AGRB | FLAT DEPTH | IDENTICAL ENDS INCHES NOMINAL 0.0625 |
| AKPS | DUTY CYCLE | CONTINUOUS |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 115.0 |
| AAJT | OVERALL HEIGHT | INCHES 3.281 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 2800.0 |
| AAJV | OVERALL WIDTH | INCHES 3.281 |
| ABWV | SHAFT DIAMETER | IDENTICAL ENDS INCHES MAXIMUM 0.312 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 0.900 |
Supersedes
This item replaces cancelled NIIN 005333143. An older drawing citing one of those numbers resolves here.