NSN 5990-00-103-0527 · NIIN 001030527 · FSC 5990
NO DASHES 5990001030527
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0570 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 9.500 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| ABXF | SHAFT LENGTH | FRONT SHAFT INCHES MINIMUM 0.4230 AND INCHES MAXIMUM 0.4530 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 9 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 55.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 24.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 7.50 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 930.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 32.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 7.30 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 150.00 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 26.20 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 15.00 |
| CRSJ | SHAFT TYPE | FRONT SHAFT ROUND, UNDERCUT |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDER STUD 5 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 170.0 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 3.3230 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.8700 AND INCHES MAXIMUM 0.8800 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0670 |
| ABPA | UNDERCUT DIAMETER | INCHES MAXIMUM 0.7900 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0570 |
| ABWV | SHAFT DIAMETER | FRONT SHAFT INCHES MINIMUM 0.1246 AND INCHES MAXIMUM 0.1248 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.7495 AND INCHES MAXIMUM 0.7500 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 3.8430 |