NSN 2920-00-585-5314 · NIIN 005855314 · FSC 2920
NO DASHES 2920005855314
In Stock
GENERATOR,ENGINE ACCESSORY
Engine Electrical System Components, Nonaircraft
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ELEC | VOLTAGE IN VOLTS | 24.0 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| BCMJ | CENTER TO CENTER DISTANCE BETWEEN TOP MOUNTING SLOT AND BOTTOM MOUNTING HOLE | INCHES NOMINAL 5.875 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.781 |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 3.248 |
| ABFF | FURNISHED ITEMS | OIL DEFLECTOR AND RADIO INTERFERENCE SHIELDING |
| ABGC | SLOT WIDTH | INCHES NOMINAL 0.594 |
| ABGD | SLOT LENGTH | INCHES NOMINAL 1.219 |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 7000 |
| BZRR | THREAD SERIES | UNF |
| AEUD | CENTER TO CENTER DISTANCE BETWEEN MOUNTING SLOTS | INCHES NOMINAL 3.625 |
| AFYS | KEYWAY LENGTH | INCHES NOMINAL 0.750 |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| AKCT | SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE |
| BCGN | GROUNDING METHOD | INTERNAL |
| BCGS | SHAFT DRIVE END STYLE | |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | INCHES NOMINAL 3.062 |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.516 |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 2500 |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 40.0 |
| BCGG | MINIMUM CURRENT CUT-IN SPEED IN RPM | 2300 |
| ADPY | PILOT HEIGHT | INCHES NOMINAL 0.219 |
| ANTX | DISTANCE FROM END TO KEYWAY CENTER | INCHES NOMINAL 1.344 |
| ABPT | SECOND STEP DIAMETER | INCHES NOMINAL 0.750 |
| ABRR | KEYWAY WIDTH | INCHES NOMINAL 0.156 |
| ABVA | UNTHREADED PORTION LENGTH | INCHES NOMINAL 1.250 |
| ADER | MOUNTING STYLE | |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.500 |
| CFHL | THREAD CLASS | 2A |