NSN 5905-00-573-1855 · NIIN 005731855 · FSC 5905
NO DASHES 5905005731855
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | ALL SECTIONS -10.0 TO 10.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS ABSOLUTE CONFORMITY |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR ALL SECTIONS 6.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | ALL SECTIONS 85.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | ALL SECTIONS -1.00 TO 1.00 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS ALL SECTIONS 25.000 |
| AAPN | SECTION QUANTITY | 4 |
| AAQL | BODY STYLE | |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| BYDT | BEARING TYPE | SHAFT BALL |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 2.00 |
| AEFY | SHAFT END PLAY | INCHES 0.00200 |
| AEFZ | SHAFT RUNOUT | INCHES 0.001 |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0750 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 3.000 |
| ABUF | ANGLE OF MOUNTING HOLE IN DEG | 90.0 |
| ABVJ | ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 120.0 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.249 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 24 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 1.000 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| ADAQ | BODY LENGTH | INCHES NOMINAL 2.438 |
| AECZ | MOUNTING LIP DIAMETER | INCHES MAXIMUM 2.9370 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES MAXIMUM 0.7500 |
| AAVM | PILOT LENGTH | INCHES MINIMUM 0.1000 AND INCHES MAXIMUM 0.1100 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 2.960 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0800 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS 360 DEG SINE-COSINE |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 25.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 2.00 |