NSN 5905-00-851-2402 · NIIN 008512402 · FSC 5905
NO DASHES 5905008512402
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 9000.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 5.00 |
| CBBL | FEATURES PROVIDED | HERMETICALLY SEALED |
| CBME | CUBIC MEASURE | CUBIC INCHES 0.054 |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE(S) |
| PRMT | PRECIOUS MATERIAL | GOLD |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | INCHES MINIMUM 0.095 AND INCHES MAXIMUM 0.105 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 150.0 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.055 AND INCHES MAXIMUM 0.060 |
| ABXF | SHAFT LENGTH | INCHES MAXIMUM 0.030 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.495 AND INCHES MAXIMUM 0.505 |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.495 AND INCHES MAXIMUM 0.505 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.210 AND INCHES MAXIMUM 0.230 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.172 AND INCHES MAXIMUM 0.202 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.075 |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | INCHES MINIMUM 0.095 AND INCHES MAXIMUM 0.105 |
| BYDT | BEARING TYPE | SHAFT SLEEVE |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 70.0 |
| AAPN | SECTION QUANTITY | 1 |
| TTQY | TERMINAL TYPE AND QUANTITY | PIN 3 |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -50.0 TO 50.0 |
| PMLC | PRECIOUS MATERIAL AND LOCATION | GOLD TER-INAL SURFACES |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED LEFT ADJACENT SIDE TWO ROWS |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 5.00 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES MINIMUM 0.195 AND INCHES MAXIMUM 0.205 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 1.5 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 50.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 9000.0 |
Supersedes
This item replaces cancelled NIINs 000785966 · 001777189 · 007223826 · 008264569 · 009030017 · 010873166. An older drawing citing one of those numbers resolves here.