NSN 3010-00-066-0555 · NIIN 000660555 · FSC 3010
NO DASHES 3010000660555
In Stock
GEARCASE-MOTOR
Torque Converters and Speed Changers
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAUH | SPLINE MINOR DIAMETER | SINGLE END INCHES NOMINAL 0.108 |
| BKPP | SPEED CONTROL METHOD AND DEVICE TYPE | AUTOMATIC MECHANICAL |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| CNXS | POWER RATING | OUTPUT WATTS 3.5000 |
| AKPS | DUTY CYCLE | CONTINUOUS |
| BFLY | GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | SINGLE END INLINE W/ARMATURE |
| BFMF | COOLING METHOD | NONVENTILATED |
| BKPB | CURRENT RATING METHOD | LOAD |
| AAJU | OVERALL LENGTH | INCHES 3.589 |
| AAJV | OVERALL WIDTH | INCHES 1.062 |
| BKPH | TORQUE RATING AND TYPE | INCH-OUNCES RUNNING 3.0 |
| FAAZ | PHASE | INPUT TWO |
| FREQ | FREQUENCY IN HERTZ | 400.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 10 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | CLAMP COLLAR 1 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 0.395 |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | INCHES 0.812 |
| CWGL | CURRENT RATING IN AMPS | OUTPUT SINGLE 0.049 |
| ABSA | SPLINE QUANTITY | 13 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.1247 |
| ACDC | CURRENT TYPE | INPUT AC |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END COUNTERCLOCKWISE |
| CWHK | GEARED HEAD OUTPUT SHAFT SPEED RATING | SINGLE END SINGLE REVOLUTIONS PER MINUTE 3.300 |
| AAJT | OVERALL HEIGHT | INCHES 1.062 |
| ANPZ | ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| AXCP | WINDING TYPE | INDUCTION-SINGLE VALUE CAPACITOR SPLIT PHASE |
| AXFH | SPLINE LENGTH | SINGLE END INCHES NOMINAL 0.3950 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL LOW 115.0 OR LINE TO NEUTRAL HIGH 180.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A14 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| U209120 | 82686 |
| 471640-1 | 96214 |
| 759082G2LAU17B121 | 99932 |