NSN 3010-00-330-9802 · NIIN 003309802 · FSC 3010
NO DASHES 3010003309802
In Stock
GEARCASE-MOTOR
Torque Converters and Speed Changers
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| AAJU | OVERALL LENGTH | INCHES 2.507 |
| AAJV | OVERALL WIDTH | INCHES 2.125 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.1250 |
| ACDC | CURRENT TYPE | INPUT DC |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 2 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 0.375 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 1.968 |
| CBBL | FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING POSITION |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | DUSTPROOF |
| AXCP | WINDING TYPE | PERMANENT MAGNET |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A1 |
| FEAT | SPECIAL FEATURES | FLANGE END MTG,SPACED 1.875 IN. CTO C |
| BFLY | GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | SINGLE END OFFSET ABOVE PARALLEL TO SHAFT AXIS |
| BFMF | COOLING METHOD | NONVENTILATED |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPP | SPEED CONTROL METHOD AND DEVICE TYPE | AUTOMATIC MECHANICAL |
| AAJT | OVERALL HEIGHT | INCHES 2.438 |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 0.0030 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDER LUG 2 |
| CWDY | TEMP RATING | OPERATING CELSIUS -54.0 AND OPERATING CELSIUS 71.0 |
| CWGL | CURRENT RATING IN AMPS | OUTPUT SINGLE 0.075 |
| CWHK | GEARED HEAD OUTPUT SHAFT SPEED RATING | SINGLE END SINGLE REVOLUTIONS PER MINUTE 1.000 |
| AKAE | MAXIMUM OPERATING ALTITUDE RATING | FEET 60000.0 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 003276545. An older drawing citing one of those numbers resolves here.