NSN 3010-00-390-6221 · NIIN 003906221 · FSC 3010
NO DASHES 3010003906221
In Stock
GEARCASE-MOTOR
Torque Converters and Speed Changers
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AXCP | WINDING TYPE | SERIES WOUND |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 5.000 |
| AAJT | OVERALL HEIGHT | INCHES 6.188 |
| AAJU | OVERALL LENGTH | INCHES 10.938 |
| CWGL | CURRENT RATING IN AMPS | OUTPUT SINGLE 175.000 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| AKAE | MAXIMUM OPERATING ALTITUDE RATING | FEET 25000.0 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END COUNTERCLOCKWISE |
| BKPP | SPEED CONTROL METHOD AND DEVICE TYPE | AUTOMATIC MECHANICAL |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 28.0 |
| ABSA | SPLINE QUANTITY | 12 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.5500 |
| BKPB | CURRENT RATING METHOD | LOAD |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 4.078 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 3.875 |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A14 |
| ACDC | CURRENT TYPE | INPUT DC |
| CWHK | GEARED HEAD OUTPUT SHAFT SPEED RATING | SINGLE END SINGLE REVOLUTIONS PER MINUTE 2151.000 |
| CWDY | TEMP RATING | OPERATING CELSIUS -55.0 AND OPERATING CELSIUS 65.0 AND AMBIENT CELSIUS 55.0 |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 1.4000 |
| AAJV | OVERALL WIDTH | INCHES 5.813 |
| BFLY | GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | SINGLE END OFFSET ABOVE PARALLEL TO SHAFT AXIS |