NSN 3010-00-545-3130 · NIIN 005453130 · FSC 3010
NO DASHES 3010005453130
In Stock
GEARCASE-MOTOR
Torque Converters and Speed Changers
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BKPP | SPEED CONTROL METHOD AND DEVICE TYPE | AUTOMATIC MECHANICAL |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| BFMF | COOLING METHOD | AMBIENT AIR |
| BKPB | CURRENT RATING METHOD | LOAD |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| BFLY | GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | SINGLE END OFFSET ABOVE PARALLEL TO SHAFT AXIS |
| AXCP | WINDING TYPE | INDUCTION-SHADED POLE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | OPEN |
| AAJT | OVERALL HEIGHT | INCHES 7.000 |
| AJWZ | HOLE CENTER TO SHAFT END DISTANCE | SINGLE END INCHES NOMINAL 1.1250 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE |
| CWGL | CURRENT RATING IN AMPS | OUTPUT SINGLE 2.100 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 115.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END FIRST STYLE A3 AND SECOND STYLE A13 |
| FAAZ | PHASE | INPUT SINGLE |
| FREQ | FREQUENCY IN HERTZ | 50.0 OR 60.0 |
| THSD | THREAD SERIES DESIGNATOR | SINGLE END UNIFIED NATIONAL COARSE (UNC) |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 2 |
| CBBL | FEATURES PROVIDED | THERMAL PROTECTIVE DEVICE AND HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 5.000 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 5.500 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 2.375 |
| AAJU | OVERALL LENGTH | INCHES 8.750 |
| AAJV | OVERALL WIDTH | INCHES 3.000 |
| AASA | THREAD LENGTH | SINGLE END INCHES NOMINAL 0.6250 |
| AAUB | HOLE DIAMETER | SINGLE END INCHES NOMINAL 0.1900 |
| AAZQ | HOLE DEPTH | SINGLE END INCHES NOMINAL 0.5000 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.5000 |
| ACDC | CURRENT TYPE | INPUT AC |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 2.375 |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | INCHES 3.312 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 12-1850-01 | 40524 |
| 12-1850-01 | 49524 |
| 12-1850-21 | 49524 |
| 2004 | 76411 |