NSN 3010-00-578-3545 · NIIN 005783545 · FSC 3010
NO DASHES 3010005783545
In Stock
GEARCASE-MOTOR
Torque Converters and Speed Changers
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 1.375 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| CWHK | GEARED HEAD OUTPUT SHAFT SPEED RATING | SINGLE END SINGLE REVOLUTIONS PER MINUTE 656.000 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A11 |
| AAJU | OVERALL LENGTH | INCHES 4.600 |
| AAJV | OVERALL WIDTH | INCHES 1.660 |
| AAJT | OVERALL HEIGHT | INCHES 1.660 |
| CWDY | TEMP RATING | OPERATING CELSIUS -54.0 AND OPERATING CELSIUS 85.0 |
| AKAE | MAXIMUM OPERATING ALTITUDE RATING | FEET 30000.0 |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| AXCP | WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| AXGY | MOUNTING METHOD | PAD |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| BFLY | GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | SINGLE END INLINE W/ARMATURE |
| BKPH | TORQUE RATING AND TYPE | INCH-OUNCES RUNNING 30.0 |
| BKPP | SPEED CONTROL METHOD AND DEVICE TYPE | ELECTRICAL MECHANICAL |
| CBBL | FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING POSITION |
| CNMK | WOODRUFF KEY SIZE DESIGNATION | 201 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 0.498 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES MINIMUM 0.2494 AND INCHES MAXIMUM 0.2497 |
| BFMF | COOLING METHOD | AMBIENT AIR |
| BFMR | KEYWAY CENTER TO SHAFT END DISTANCE | SINGLE END INCHES NOMINAL 0.2500 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 208.0 |
| FREQ | FREQUENCY IN HERTZ | 400.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 3 |
| ACDC | CURRENT TYPE | INPUT AC |
| FAAZ | PHASE | INPUT THREE |
| CWGD | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | INCHES 1.375 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 5212-992000 | 81833 |
| 212-992 | 81833 |