NSN 3010-00-635-0440 · NIIN 006350440 · FSC 3010
NO DASHES 3010006350440
In Stock
GEARCASE-MOTOR
Torque Converters and Speed Changers
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJU | OVERALL LENGTH | INCHES 7.390 |
| AAJT | OVERALL HEIGHT | INCHES 4.170 |
| CWHR | ANGLE OF SHAFT TO MOUNTING BASE | SINGLE END DEGREES 90.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A5 |
| ABXQ | FLATTED PORTION LENGTH | SINGLE END INCHES NOMINAL 0.8800 |
| ACDC | CURRENT TYPE | INPUT DC |
| AGRB | FLAT DEPTH | SINGLE END INCHES NOMINAL 0.0200 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| AXGY | MOUNTING METHOD | FACE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | SLOT 4 |
| BFLY | GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | SINGLE END ANGLED TO ARMATURE/ROTOR AXIS |
| BFMF | COOLING METHOD | SELF-VENTILATED |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPH | TORQUE RATING AND TYPE | INCH-POUNDS RUNNING 13.0 |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 0.0200 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 1.000 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 1.357 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 1.250 |
| ANPZ | ENCLOSURE FEATURE | INDUSTRIAL |
| AXCP | WINDING TYPE | SHUNT WOUND |
| CWGL | CURRENT RATING IN AMPS | OUTPUT SINGLE 0.350 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 115.0 |
| CWHK | GEARED HEAD OUTPUT SHAFT SPEED RATING | SINGLE END SINGLE REVOLUTIONS PER MINUTE 29.000 |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| AAJV | OVERALL WIDTH | INCHES 3.828 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.5000 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 2.940 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 4 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| NSH12RH115V1725RPM | 07829 |
| 439 | 07829 |
| NSH12RH115V1725R | 07829 |