NSN 3010-00-679-9396 · NIIN 006799396 · FSC 3010
NO DASHES 3010006799396
In Stock
GEARCASE-MOTOR
Torque Converters and Speed Changers
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AKAE | MAXIMUM OPERATING ALTITUDE RATING | FEET 75000.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 0.812 |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDER LUG 2 |
| AAJU | OVERALL LENGTH | INCHES 3.385 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 27.5 |
| CWHK | GEARED HEAD OUTPUT SHAFT SPEED RATING | SINGLE END SINGLE REVOLUTIONS PER MINUTE 33.000 |
| AAUB | HOLE DIAMETER | SINGLE END INCHES NOMINAL 0.0620 |
| AAZQ | HOLE DEPTH | SINGLE END INCHES NOMINAL 0.1870 |
| AAJV | OVERALL WIDTH | INCHES 1.124 |
| CWDY | TEMP RATING | OPERATING CELSIUS -55.0 AND OPERATING CELSIUS 85.0 |
| AJWZ | HOLE CENTER TO SHAFT END DISTANCE | SINGLE END INCHES NOMINAL 0.0940 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | INTERMITTENT |
| AXCP | WINDING TYPE | SERIES WOUND |
| AXGY | MOUNTING METHOD | PAD |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| BFLT | TIME INTERVAL | SECONDS MAXIMUM ON 2.0 AND SECONDS MINIMUM OFF 3.0 |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPH | TORQUE RATING AND TYPE | INCH-POUNDS RUNNING 2.0 AND INCH-POUNDS STALLED 2.5 AND INCH-POUNDS STARTING 2.5 |
| BKPP | SPEED CONTROL METHOD AND DEVICE TYPE | AUTOMATIC REMOTE |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 0.550 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.1874 |
| BFLY | GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | SINGLE END ANGLED TO ARMATURE/ROTOR AXIS |
| BFMF | COOLING METHOD | AIR TO AIR COOLED |
| CWGL | CURRENT RATING IN AMPS | OUTPUT SINGLE 0.250 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A13 |
| AAJT | OVERALL HEIGHT | INCHES 1.375 |
| ACDC | CURRENT TYPE | INPUT DC |
| CWHR | ANGLE OF SHAFT TO MOUNTING BASE | SINGLE END DEGREES 90.0 |
| CWGD | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | INCHES 0.812 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 43A159 | 25140 |
| 2602 | 08719 |
| 230-0284-000 | 13499 |
Supersedes
This item replaces cancelled NIINs 006864129 · 007809378 · 008141766 · 009875504. An older drawing citing one of those numbers resolves here.