NSN 3010-00-684-2865 · NIIN 006842865 · FSC 3010
NO DASHES 3010006842865
In Stock
GEARCASE-MOTOR
Torque Converters and Speed Changers
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJV | OVERALL WIDTH | INCHES 1.250 |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| CBBL | FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING POSITION |
| AXGY | MOUNTING METHOD | PAD |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 4 |
| BFLT | TIME INTERVAL | SECONDS MAXIMUM ON 3.0 AND SECONDS MINIMUM OFF 6.0 |
| BFLY | GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | SINGLE END INLINE W/ARMATURE |
| CWHK | GEARED HEAD OUTPUT SHAFT SPEED RATING | SINGLE END LOW REVOLUTIONS PER MINUTE 12.000 AND HIGH REVOLUTIONS PER MINUTE 15.000 |
| BFMF | COOLING METHOD | NONVENTILATED |
| CWDY | TEMP RATING | OPERATING CELSIUS -54.0 AND OPERATING CELSIUS 71.0 |
| ABXQ | FLATTED PORTION LENGTH | SINGLE END INCHES NOMINAL 0.4687 |
| AAJT | OVERALL HEIGHT | INCHES 1.250 |
| AAJU | OVERALL LENGTH | INCHES 4.419 |
| CWHR | ANGLE OF SHAFT TO MOUNTING BASE | SINGLE END DEGREES 90.0 |
| BKPB | CURRENT RATING METHOD | LOAD |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | INTERMITTENT |
| ANPZ | ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| AXCP | WINDING TYPE | PERMANENT MAGNET |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.3130 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A5 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 3 |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 0.0050 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 0.500 |
| CWGL | CURRENT RATING IN AMPS | OUTPUT SINGLE 0.300 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 26.0 |
| AGRB | FLAT DEPTH | SINGLE END INCHES NOMINAL 0.0320 |
| ACDC | CURRENT TYPE | INPUT DC |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 1.000 |
| CWGD | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | INCHES 1.000 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 001272171. An older drawing citing one of those numbers resolves here.