NSN 3010-00-832-6572 · NIIN 008326572 · FSC 3010
NO DASHES 3010008326572
In Stock
GEARCASE-MOTOR
Torque Converters and Speed Changers
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BFMF | COOLING METHOD | NONVENTILATED |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 4 |
| BFLY | GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | SINGLE END OFFSET ABOVE PARALLEL TO SHAFT AXIS |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| AXCP | WINDING TYPE | INDUCTION-SHADED POLE |
| AXGY | MOUNTING METHOD | PAD |
| CWGL | CURRENT RATING IN AMPS | OUTPUT SINGLE 0.900 |
| CWHK | GEARED HEAD OUTPUT SHAFT SPEED RATING | SINGLE END SINGLE REVOLUTIONS PER MINUTE 20.000 |
| BFNF | UNDERCUT CENTER TO SHAFT END DISTANCE | SINGLE END INCHES NOMINAL 0.110 |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPH | TORQUE RATING AND TYPE | INCH-POUNDS RUNNING 11.5 AND INCH-POUNDS STALLED 17.0 |
| BKPP | SPEED CONTROL METHOD AND DEVICE TYPE | AUTOMATIC MECHANICAL |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| CBBL | FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING POSITION |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 1.250 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 1.625 |
| AAJT | OVERALL HEIGHT | INCHES 3.875 |
| AAJU | OVERALL LENGTH | INCHES 4.399 |
| AAJV | OVERALL WIDTH | INCHES 2.750 |
| AAUB | HOLE DIAMETER | SINGLE END INCHES MINIMUM 0.096 AND INCHES MAXIMUM 0.097 |
| AAZQ | HOLE DEPTH | SINGLE END INCHES NOMINAL 0.3090 |
| ABPA | UNDERCUT DIAMETER | SINGLE END INCHES MINIMUM 0.275 AND INCHES MAXIMUM 0.278 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES MINIMUM 0.308 AND INCHES MAXIMUM 0.311 |
| ACDC | CURRENT TYPE | INPUT AC |
| AGQL | UNDERCUT LENGTH | SINGLE END INCHES MINIMUM 0.029 AND INCHES MAXIMUM 0.032 |
| AJWZ | HOLE CENTER TO SHAFT END DISTANCE | SINGLE END INCHES NOMINAL 0.9300 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END COUNTERCLOCKWISE |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 2 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 115.0 |
| CWGD | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | INCHES 1.564 |
| CWHR | ANGLE OF SHAFT TO MOUNTING BASE | SINGLE END DEGREES 90.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END FIRST STYLE A13 AND SECOND STYLE A28 |
| FAAZ | PHASE | INPUT SINGLE |
| FREQ | FREQUENCY IN HERTZ | 50.0 OR 60.0 |