NSN 3010-00-869-5553 · NIIN 008695553 · FSC 3010
NO DASHES 3010008695553
In Stock
GEARCASE-MOTOR
Torque Converters and Speed Changers
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ANPZ | ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| ACDC | CURRENT TYPE | INPUT DC |
| BKPP | SPEED CONTROL METHOD AND DEVICE TYPE | AUTOMATIC MECHANICAL |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| AXCP | WINDING TYPE | PERMANENT MAGNET |
| AAJU | OVERALL LENGTH | INCHES 3.937 |
| AGRB | FLAT DEPTH | SINGLE END INCHES NOMINAL 0.0105 |
| AKAE | MAXIMUM OPERATING ALTITUDE RATING | FEET 60000.0 |
| BKPH | TORQUE RATING AND TYPE | INCH-OUNCES RUNNING 30.0 AND INCH-OUNCES STALLED 100.0 |
| AAJV | OVERALL WIDTH | INCHES 1.125 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.1870 |
| ABXQ | FLATTED PORTION LENGTH | SINGLE END INCHES NOMINAL 0.3755 |
| BFLT | TIME INTERVAL | SECONDS MAXIMUM ON 7.0 AND SECONDS MINIMUM OFF 30.0 |
| BFLY | GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | SINGLE END INLINE W/ARMATURE |
| BFMF | COOLING METHOD | NONVENTILATED |
| BKPB | CURRENT RATING METHOD | LOAD |
| AXGY | MOUNTING METHOD | FLANGE |
| CWGL | CURRENT RATING IN AMPS | OUTPUT SINGLE 0.300 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 26.5 |
| CWHK | GEARED HEAD OUTPUT SHAFT SPEED RATING | SINGLE END SINGLE REVOLUTIONS PER MINUTE 15.000 |
| CWHR | ANGLE OF SHAFT TO MOUNTING BASE | SINGLE END DEGREES 90.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A5 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | INTERMITTENT |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 0.375 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 4 |
| AAJT | OVERALL HEIGHT | INCHES 1.125 |
| CWDY | TEMP RATING | OPERATING CELSIUS -54.0 AND OPERATING CELSIUS 38.0 |
| FEAT | SPECIAL FEATURES | SHAFT END STYLE A5 EXCEPT ADDITIONAL FLAT LOCATED AT 90 DEGREES |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 2 |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | INCHES 0.874 |
| CBBL | FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING POSITION |