NSN 3010-00-880-2677 · NIIN 008802677 · FSC 3010
NO DASHES 3010008802677
In Stock
GEARCASE-MOTOR
Torque Converters and Speed Changers
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AXGY | MOUNTING METHOD | FIXED BASE |
| AAJU | OVERALL LENGTH | INCHES 0.940 |
| AAJT | OVERALL HEIGHT | INCHES 2.438 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A1 |
| AXCP | WINDING TYPE | SYNCHRONOUS AND INDUCTION-PERMANENT SPLIT CAPACITOR SPLIT PHASE |
| FEAT | SPECIAL FEATURES | FIXED FLANGE MOUNTING |
| BKPH | TORQUE RATING AND TYPE | INCH-OUNCES RUNNING 0.030 |
| BKPP | SPEED CONTROL METHOD AND DEVICE TYPE | AUTOMATIC MECHANICAL |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| AAJV | OVERALL WIDTH | INCHES 2.125 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES MINIMUM 0.1240 AND INCHES MAXIMUM 0.1260 |
| ACDC | CURRENT TYPE | INPUT AC |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 2 |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| BFLY | GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | SINGLE END OFFSET ABOVE PARALLEL TO SHAFT AXIS |
| BFMF | COOLING METHOD | NONVENTILATED |
| BKPB | CURRENT RATING METHOD | LOAD |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 115.0 |
| CBBL | FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING POSITION |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 0.375 |
| FREQ | FREQUENCY IN HERTZ | 400.0 |
| CWHK | GEARED HEAD OUTPUT SHAFT SPEED RATING | SINGLE END SINGLE REVOLUTIONS PER MINUTE 15.000 |
| CWHR | ANGLE OF SHAFT TO MOUNTING BASE | SINGLE END DEGREES 0.000 |
| CWDY | TEMP RATING | OPERATING CELSIUS -55.0 AND OPERATING CELSIUS 85.0 AND AMBIENT CELSIUS 50.0 |
| CWGL | CURRENT RATING IN AMPS | OUTPUT SINGLE 0.050 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 1.969 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 2 |
| FAAZ | PHASE | INPUT SINGLE |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 009456492. An older drawing citing one of those numbers resolves here.