NSN 3010-00-962-1277 · NIIN 009621277 · FSC 3010
NO DASHES 3010009621277
In Stock
GEARCASE-MOTOR
Torque Converters and Speed Changers
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 4 |
| AAJV | OVERALL WIDTH | INCHES 3.562 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.1875 |
| ABXQ | FLATTED PORTION LENGTH | SINGLE END INCHES NOMINAL 0.3125 |
| AGRB | FLAT DEPTH | SINGLE END INCHES NOMINAL 0.0200 |
| AXCP | WINDING TYPE | SERIES WOUND |
| AXGY | MOUNTING METHOD | FACE |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| AAJT | OVERALL HEIGHT | INCHES 3.562 |
| AAJU | OVERALL LENGTH | INCHES 5.062 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 24.0 |
| CWHK | GEARED HEAD OUTPUT SHAFT SPEED RATING | SINGLE END SINGLE REVOLUTIONS PER MINUTE 10.000 |
| CWHR | ANGLE OF SHAFT TO MOUNTING BASE | SINGLE END DEGREES 90.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A5 |
| FEAT | SPECIAL FEATURES | EXCEPT AS MODIFIED BY THE STYLE,SHAFT IS VERTICAL EXTENDING BELOW THE MTG BASE |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 3 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 1.250 |
| CWDY | TEMP RATING | OPERATING CELSIUS 82.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 1.625 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 0.688 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 0.485 |
| ANPZ | ENCLOSURE FEATURE | INDUSTRIAL |
| BFMF | COOLING METHOD | AMBIENT AIR |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| BFLY | GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | SINGLE END ANGLED TO ARMATURE/ROTOR AXIS |
| ACDC | CURRENT TYPE | INPUT DC |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 0.0100 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 012746276. An older drawing citing one of those numbers resolves here.