NSN 3010-01-040-2968 · NIIN 010402968 · FSC 3010
NO DASHES 3010010402968
In Stock
GEARCASE-MOTOR
Torque Converters and Speed Changers
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJT | OVERALL HEIGHT | INCHES 5.520 |
| AAJU | OVERALL LENGTH | INCHES 9.120 |
| AAJV | OVERALL WIDTH | INCHES 5.060 |
| ACDC | CURRENT TYPE | INPUT AC |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | GENERAL PURPOSE |
| AXCP | WINDING TYPE | REPULSION-INDUCTION |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| BFLY | GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | SINGLE END ANGLED TO ARMATURE/ROTOR AXIS |
| BFMF | COOLING METHOD | AMBIENT AIR |
| BKPH | TORQUE RATING AND TYPE | FOOT-POUNDS RUNNING 3.6 |
| BKPP | SPEED CONTROL METHOD AND DEVICE TYPE | ELECTRICAL DIFFERENTIAL |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 0.0666 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 1.120 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 3.221 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 3.020 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 3.360 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 115.0 |
| CWHK | GEARED HEAD OUTPUT SHAFT SPEED RATING | SINGLE END SINGLE REVOLUTIONS PER MINUTE 43.000 |
| FAAZ | PHASE | INPUT SINGLE |
| FEAT | SPECIAL FEATURES | SHAFT END SQUARE KEYED AND SPLINED ON 75 PCT OF END |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 4 |