NSN 3010-01-114-2109 · NIIN 011142109 · FSC 3010
NO DASHES 3010011142109
In Stock
COUPLING,SHAFT,FLEXIBLE
Torque Converters and Speed Changers
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAWY | COUNTERBORE DIAMETER | BOTH ENDS INCHES NOMINAL 2.5000 |
| AAWZ | COUNTERBORE DEPTH | BOTH ENDS INCHES NOMINAL 0.5000 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 4.250 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 4.750 |
| ABQA | TAPER MINOR DIAMETER | BOTH ENDS INCHES NOMINAL 1.6020 |
| ABRR | KEYWAY WIDTH | BOTH ENDS INCHES NOMINAL 0.499 |
| ABRV | KEYWAY DEPTH | BOTH ENDS INCHES NOMINAL 0.2500 |
| ADGE | BORE LENGTH | BOTH ENDS INCHES NOMINAL 2.0625 |
| AGZD | BORE SHAPE | BOTH ENDS TAPERED |
| APGF | DESIGN TYPE | INTERNAL GEAR |
| BSGH | KEYING FACILITY QUANTITY | 1 |
| BSGK | KEYING FACILITY TYPE | BOTH ENDS KEYWAY |
| BSNP | SECURING METHOD | BOTH ENDS KEY |
| CBBL | FEATURES PROVIDED | KEYWAY AND COUNTERBORE AND SPLINE GEAR TEETH |
| CFGD | TAPER LARGEST DIAMETER | BOTH ENDS INCHES NOMINAL 1.7000 |
| FEAT | SPECIAL FEATURES | MADE OF 1040 STEEL;TEETH ARE INDUCTION HARDENED;ROCKWELL C 45 TO 50;KEYWAY DEPTH AT LARGE END AND KEYWAY TOP RUNS PARALLEL TO CENTER LINE;TAPER IS 3/4 IN TO THE FT;SECOND COUNTERBORE 3 IN. DIA,3/16 IN DEEP |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| C-9080 | 65456 |