NSN 3010-01-343-0921 · NIIN 013430921 · FSC 3010
NO DASHES 3010013430921
In Stock
COUPLING,SHAFT,RIGID
Torque Converters and Speed Changers
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.100 AND INCHES MAXIMUM 0.106 |
| AAUH | SPLINE MINOR DIAMETER | THROUGH BORE INCHES MINIMUM 0.1550 AND INCHES MAXIMUM 0.1580 |
| AAUJ | SPLINE MAJOR DIAMETER | THROUGH BORE INCHES NOMINAL 0.2030 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.845 AND INCHES MAXIMUM 0.850 |
| ABSA | SPLINE QUANTITY | 8 |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 0.560 |
| AGZD | BORE SHAPE | THROUGH BORE SPLINED |
| AXFG | SPLINE PRESSURE ANGLE IN DEG | 45.000 |
| AXFH | SPLINE LENGTH | THROUGH BORE INCHES MINIMUM 0.595 AND INCHES MAXIMUM 0.600 |
| AXYS | SPLINE TYPE | THROUGH BORE INVOLUTE |
| BSNS | UNTHREADED HOLE QUANTITY | 1 |
| CBBL | FEATURES PROVIDED | BORE COUNTERBORE |
| CQRG | BODY MATERIAL | STEEL COMP 630 |
| FEAT | SPECIAL FEATURES | SECOND END HAS ARM PROTRUDING FROM OD, 0.188 IN. THK, 0.298 IN. W, 0.750 IN. LG FROM BORE CENTER TO ARM END; COUNTERBORE DIAMETER: BOTH ENDS, 0.250 IN. MINIMUM AND 0.280 IN. MAXIMUM; COUNTERBORE DEPTH: FIRST END, 0.150 IN. NOMINAL; SECOND END, 0.100 IN. NOMINAL; PITCH DIAMETER: THROUGH BORE, 0.167 IN. NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S 5643 |
| STYL | STYLE DESIGNATOR |