NSN 3010-01-418-8886 · NIIN 014188886 · FSC 3010
NO DASHES 3010014188886
In Stock
UNIVERSAL JOINT,NONVEHICULAR
Torque Converters and Speed Changers
Application: WEAPONS SYSTEM SEAWOLF CLASS SSN
Technical characteristics
10 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES NOMINAL 7.420 |
| AGAV | END ITEM IDENTIFICATION | WEAPONS SYSTEM SEAWOLF CLASS SSN |
| APGF | DESIGN TYPE | BLOCK AND PIN |
| BDDS | HUB BORE DIAMETER | SECOND END INCHES MINIMUM 0.750 AND INCHES MAXIMUM 0.755 |
| BDDS | HUB BORE DIAMETER | FIRST END INCHES MINIMUM 0.686 AND INCHES MAXIMUM 0.697 |
| BYRC | CONNECTION END TYPE | FIRST END HUB,SQUARE BORE |
| BYRC | CONNECTION END TYPE | SECOND END HUB,BORED |
| CZKV | HUB BORE WIDTH ACROSS FLATS | FIRST END INCHES MINIMUM 0.750 AND INCHES MAXIMUM 0.755 |
| CZKV | HUB BORE WIDTH ACROSS FLATS | SECOND END INCHES NOMINAL 1.28 |
| FEAT | SPECIAL FEATURES | USED ON REMOTE OPERATING GEAR FOR PLUMBING VLAVE PL-8 ARRANGEMENT, SECOND END OD SQ 1.500 IN. ACROSS CORNERS WITH 2 SECURING HOLES 0.380 IN. AND 0.810 IN. FROM HUB END 90 DEGREES APART, LG FROM UNIVERSAL JOINT CENTER TO HUB END 2.120 IN., FIRST END LG FROM UNIVERSAL JOINT CENTER TO HUB END 5.310 IN. |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| DA2500-3567 #9 | 43689 |
| 211082493 | 53711 |
| 6409001 | 53711 |
| 528-6409001 FIND 9 | 53711 |
| C-650-S | 83529 |