NSN 3020-00-003-3090 · NIIN 000033090 · FSC 3020
NO DASHES 3020000033090
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| CWNH | TOOTH FORM | STANDARD |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35,TYE 2 |
| STYL | STYLE DESIGNATOR | |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 0.7628 AND INCHES MAXIMUM 0.7638 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.187 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.375 |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 10 OR QUALITY NUMBER 11 |
| MATT | MATERIAL | OVERALL STEEL COMP 303 |
| ANTP | BORE STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.791 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.343 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.218 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.125 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-764,TYE 303,COND A |
| AJLA | TEETH QUANTITY | 55 |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| GP40-55 | 23266 |
| P72S19-55 | 29440 |
| 419495-1055 | 96214 |
| E23-55Q10 | 00328 |
| G21-55 | 00141 |
| G21-55-Q10 | 00141 |
| E23-55 | 00328 |
| E46S55 | 12444 |
Supersedes
This item replaces cancelled NIIN 011032445. An older drawing citing one of those numbers resolves here.