NSN 3020-00-009-3383 · NIIN 000093383 · FSC 3020
NO DASHES 3020000093383
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.270 |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.250 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| SFTT | SURFACE TREATMENT | OVERALL ANODIZE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL-A-8625 |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 1.2493 AND INCHES MAXIMUM 1.2500 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.125 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.187 |
| CWTR | HUB STYLE DESIGNATOR | |
| AAQL | BODY STYLE | |
| ABSX | ATTACHMENT METHOD | CLAMP |
| FEAT | SPECIAL FEATURES | ONE HOLE THROUGH GEAR FACE,1-8 IN. DIA,0.359 IN. FROM CENTER OF BORE |
| MATT | MATERIAL | OVERALL ALUMINUM ALLOY 2024 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-A-225 TO 6,T4 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.281 |
| CWNH | TOOTH FORM | STANDARD |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 12 |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 0.250 |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.020 |
| STYL | STYLE DESIGNATOR | |
| AJLA | TEETH QUANTITY | 80 |
| ANTP | BORE STYLE | |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 0.500 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 74833-1 | 82340 |