NSN 3020-00-012-0073 · NIIN 000120073 · FSC 3020
NO DASHES 3020000120073
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWRM | FACE NOMINAL WIDTH | INCHES 0.062 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.645 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.188 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STYL | STYLE DESIGNATOR | |
| AJLA | TEETH QUANTITY | 60 |
| ANTP | BORE STYLE | |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 0.6240 AND INCHES MAXIMUM 0.6250 |
| CWNH | TOOTH FORM | STUB |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763,CLASS303SE |
| AAQL | BODY STYLE | |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.125 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.312 |
| MATT | MATERIAL | OVERALL STEEL COMP 303SE |