NSN 3020-00-012-3995 · NIIN 000123995 · FSC 3020
NO DASHES 3020000123995
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ANTP | BORE STYLE | |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.300 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.095 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.187 |
| CWTR | HUB STYLE DESIGNATOR | |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | AXIALLY THROUGH HUB FIRST END PLAIN 2 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.249 |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 1.2073 AND INCHES MAXIMUM 1.2083 |
| AJLA | TEETH QUANTITY | 58 |
| CWZK | MOUNTING HOLE NOMINAL DIAMETER | AXIALLY THROUGH HUB FIRST END INCHES 0.112 |
| CWZN | BOLT HOLE CIRCLE NOMINAL DIAMETER | AXIALLY THROUGH HUB FIRST END INCHES 0.188 |
| MATT | MATERIAL | OVERALL ALUMINUM ALLOY 6061 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-A-225 TO 8,T6 |
| STYL | STYLE DESIGNATOR | |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 0.560 |
| AAQL | BODY STYLE | |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 0.250 |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.190 |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.110 |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 10 OR QUALITY NUMBER 11 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 59-820-13 | 56232 |
| 1225949-13 | 10001 |
| 1225949 | 10001 |