NSN 3020-00-012-6019 · NIIN 000126019 · FSC 3020
NO DASHES 3020000126019
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| STYL | STYLE DESIGNATOR | |
| ANTP | BORE STYLE | |
| BDTX | SPLINE PITCH DIAMETER | FIRST END INCHES NOMINAL 0.3438 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 30.0 AND ROCKWELL C MAXIMUM 45.0 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S-6260 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 1.2000 |
| AJLA | TEETH QUANTITY | 7 |
| CWRM | FACE NOMINAL WIDTH | INCHES 1.489 |
| MATT | MATERIAL | OVERALL STEEL COMP E9310 |
| AAQL | BODY STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.528 |
| CWPP | PRESSURE ANGLE | DEGREES 20.8597 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | BOTH ENDS INCHES 0.985 |
| SFTT | SURFACE TREATMENT | OVERALL CARBON |
| CWRS | BORE NOMINAL DIAMETER | FIRST END INCHES 0.368 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | BOTH ENDS INCHES 0.623 |
| ABSA | SPLINE QUANTITY | 11 |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| S6135-20681-001 | 21540 |
| S6135-20681-1 | 28546 |
| S6135-20681-001 | 57152 |
| S6135-20681-1 | 78286 |
| S6135-20681 | 78286 |
| S6135-2068-1-1 | 93828 |
| S6135-20681-1 | 11371 |
| S6135-20681-001 | 11867 |