NSN 3020-00-015-8612 · NIIN 000158612 · FSC 3020
NO DASHES 3020000158612
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | OVERALL STEEL COMP E9310 |
| SFTT | SURFACE TREATMENT | OVERALL OXIDE |
| AAQL | BODY STYLE | |
| ABSA | SPLINE QUANTITY | 12 |
| STYL | STYLE DESIGNATOR | |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | BOTH ENDS INCHES 0.855 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.434 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6265 |
| CWXG | SECOND STEP NOMINAL LENGTH | SECOND END INCHES 0.122 |
| CWXL | SECOND STEP NOMINAL DIAMETER | FIRST END INCHES 1.060 |
| CWXL | SECOND STEP NOMINAL DIAMETER | SECOND END INCHES 1.060 |
| FEAT | SPECIAL FEATURES | SPLINE MINOR NOM DIAMETER 0.550 IN. |
| CWXG | SECOND STEP NOMINAL LENGTH | FIRST END INCHES 0.122 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.848 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 2.144 |
| CWNH | TOOTH FORM | STUB |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 0.984 |
| CWXB | FIRST STEP NOMINAL DIAMETER | SECOND END INCHES 0.984 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 1.7500 |
| AJLA | TEETH QUANTITY | 35 |
| BDTX | SPLINE PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 0.6000 |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.368 |
| CWWH | END NOMINAL LENGTH | SECOND END INCHES 0.368 |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 0.875 |
| CWWN | END NOMINAL DIAMETER | SECOND END INCHES 0.875 |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.365 |
| CWWS | FIRST STEP NOMINAL LENGTH | SECOND END INCHES 0.365 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-13924,CLASS 2 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTG | COUNTERBORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.625 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.390 |