NSN 3020-00-021-3112 · NIIN 000213112 · FSC 3020
NO DASHES 3020000213112
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWRM | FACE NOMINAL WIDTH | INCHES 0.282 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.283 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.207 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.345 |
| CWNH | TOOTH FORM | STANDARD |
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 1.1657 AND INCHES MAXIMUM 1.1667 |
| AJLA | TEETH QUANTITY | 56 |
| ANTP | BORE STYLE | |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.187 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.245 |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 10 OR QUALITY NUMBER 11 |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 0.250 |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.100 |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 0.375 |
| MATT | MATERIAL | OVERALL ALUMINUM ALLOY 6061 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-A-225 TO 8,T6 |
| SFTT | SURFACE TREATMENT | OVERALL ANODIZE |
| STYL | STYLE DESIGNATOR |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 45-036-56 | 56232 |
| 1412581-56 | 10001 |
| 1412581 | 10001 |