NSN 3020-00-026-8943 · NIIN 000268943 · FSC 3020
NO DASHES 3020000268943
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 4.3310 AND INCHES MAXIMUM 4.3330 |
| AJLA | TEETH QUANTITY | 52 |
| ANTP | BORE STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 4.500 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.875 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.500 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.1260 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 1.4970 |
| FEAT | SPECIAL FEATURES | BORE UNDERCUT AT FIRST END OF HUB 0.250 IN. FROM END OF HUB,0.875 IN. LG BY 1.250 IN. DIA,FOUR SLOTS ON FIRST END OF HUB 0.094 IN. W BY 0.875 IN. DEEP,FACE OF GEAR CUTOUT 0.219 IN. RADIUS 210 DEG PLUS A 0.312 IN. RADIUS ON EA END LG |
| MATT | MATERIAL | OVERALL STEEL COMP 5155 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE FED STD66,AISI TO SAE 1030 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STYL | STYLE DESIGNATOR |