NSN 3020-00-027-4724 · NIIN 000274724 · FSC 3020
NO DASHES 3020000274724
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 0.3740 AND INCHES MAXIMUM 0.3750 |
| AJLA | TEETH QUANTITY | 24 |
| ANTP | BORE STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.405 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.200 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.095 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.187 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.375 |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 10 OR QUALITY NUMBER 11 |
| FEAT | SPECIAL FEATURES | 0.112 IN. DIA THREADED HOLE,FOR POSITIONING,LOCATED ON HUB |
| MATT | MATERIAL | OVERALL ALUMINUM ALLOY 6061 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-A-225 TO 8,T6 |
| STYL | STYLE DESIGNATOR |