NSN 3020-00-033-5150 · NIIN 000335150 · FSC 3020
NO DASHES 3020000335150
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| ABSA | SPLINE QUANTITY | 12 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 2.1000 |
| AJLA | TEETH QUANTITY | 21 |
| ANTP | BORE STYLE | |
| BDTX | SPLINE PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 0.6000 |
| CQFM | HARDNESS RATING | HUB ROCKWELL C MINIMUM 25.0 AND ROCKWELL C MAXIMUM 35.0 |
| CQFM | HARDNESS RATING | TEETH ROCKWELL C MINIMUM 58.0 AND ROCKWELL C MAXIMUM 62.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 2.260 |
| CWNH | TOOTH FORM | STUB |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 1.515 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.665 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.380 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.685 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 1.450 |
| CWWH | END NOMINAL LENGTH | SECOND END INCHES 0.047 |
| CWWN | END NOMINAL DIAMETER | BOTH ENDS INCHES 0.935 |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.065 |
| CWWS | FIRST STEP NOMINAL LENGTH | SECOND END INCHES 0.618 |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 1.340 |
| CWXB | FIRST STEP NOMINAL DIAMETER | SECOND END INCHES 1.340 |
| FEAT | SPECIAL FEATURES | 1ST COUNTERBORE DIAMETER 0.745 IN. DEPTH 1.40 IN.AND 2ND COUNTERBORE DIAMETER 0.718 IN. DEPTH 0.420IN. 2ND END ;PLUG NO.532527 FURNISHED IN BORE 2ND END |
| MATT | MATERIAL | OVERALL STEEL |
| STYL | STYLE DESIGNATOR |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 532543 | 28839 |