NSN 3020-00-037-5690 · NIIN 000375690 · FSC 3020
NO DASHES 3020000375690
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| ABSA | SPLINE QUANTITY | 16 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 1.1667 |
| AJLA | TEETH QUANTITY | 7 |
| ANTP | BORE STYLE | |
| BDTX | SPLINE PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 0.5000 |
| CQFM | HARDNESS RATING | HUB ROCKWELL C MINIMUM 30.0 AND ROCKWELL C MAXIMUM 40.0 |
| CQFM | HARDNESS RATING | TEETH ROCKWELL A MINIMUM 79.0 AND ROCKWELL A MAXIMUM 85.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.500 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 1.260 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 28.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.449 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.810 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.515 |
| CWTB | COUNTERBORE NOMINAL DEPTH | SECOND END INCHES 0.280 |
| CWTG | COUNTERBORE NOMINAL DIAMETER | SECOND END INCHES 0.670 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.670 |
| MATT | MATERIAL | OVERALL STEEL COMP E9310 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6260 |
| STYL | STYLE DESIGNATOR |