NSN 3020-00-042-6413 · NIIN 000426413 · FSC 3020
NO DASHES 3020000426413
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 1.9990 AND INCHES MAXIMUM 2.0000 |
| AJLA | TEETH QUANTITY | 96 |
| ANTP | BORE STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 2.041 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.283 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.093 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.187 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.245 |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 10 OR QUALITY NUMBER 11 |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 0.250 |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.130 |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 0.375 |
| MATT | MATERIAL | OVERALL ALUMINUM ALLOY 6061 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-A-225 TO 8,T6 |
| SFTT | SURFACE TREATMENT | OVERALL ANODIZE |
| STYL | STYLE DESIGNATOR |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 45-037-96 | 56232 |
| 1412582-96 | 10001 |
| 1412582 | 10001 |