NSN 3020-00-063-9083 · NIIN 000639083 · FSC 3020
NO DASHES 3020000639083
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWTR | HUB STYLE DESIGNATOR | |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.310 |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 0.620 |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.482 |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 1.270 |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 3.6657 AND INCHES MAXIMUM 3.6667 |
| AJLA | TEETH QUANTITY | 132 |
| ANTP | BORE STYLE | |
| CWRS | BORE NOMINAL DIAMETER | FIRST END INCHES 0.241 |
| CWTB | COUNTERBORE NOMINAL DEPTH | SECOND END INCHES 0.482 |
| CWTG | COUNTERBORE NOMINAL DIAMETER | SECOND END INCHES 1.000 |
| MATT | MATERIAL | OVERALL ALUMINUM ALLOY 6061 |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | AXIALLY THROUGH HUB FIRST END PLAIN 2 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 3.721 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.792 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.125 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-A-225 TO 8,T4 |
| STYL | STYLE DESIGNATOR | |
| CWZK | MOUNTING HOLE NOMINAL DIAMETER | AXIALLY THROUGH HUB FIRST END INCHES 0.112 |
| AAQL | BODY STYLE |