NSN 3020-00-071-8364 · NIIN 000718364 · FSC 3020
NO DASHES 3020000718364
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 0.312 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.355 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.065 |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 10 |
| AJLA | TEETH QUANTITY | 36 |
| ANTP | BORE STYLE | |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.188 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.116 |
| STYL | STYLE DESIGNATOR | |
| MATT | MATERIAL | OVERALL ALUMINUM ALLOY 6061 |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.310 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.792 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 0.7490 AND INCHES MAXIMUM 0.7500 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-A-225 TO 8,T6 |
| SFTT | SURFACE TREATMENT | OVERALL ANODIZE |
| FEAT | SPECIAL FEATURES | WITH GROOVE LOCATED ON 1ST END HUB 0.030 IN. W.0.304 IN. DIA |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 0.500 |