NSN 3020-00-080-3907 · NIIN 000803907 · FSC 3020
NO DASHES 3020000803907
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.187 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| AAQL | BODY STYLE | |
| CWNH | TOOTH FORM | STANDARD |
| AJLA | TEETH QUANTITY | 55 |
| ANTP | BORE STYLE | |
| BDZQ | BACKLASH DESIGNATION | GRADE E |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.186 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-764,TYE 303,COND A |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL STD SINGLE TREATMENT RESPONSE -IL-STD-171,FINISH NO. 5.4.1 |
| STYL | STYLE DESIGNATOR | |
| FEAT | SPECIAL FEATURES | MTG HOLES SPACED 90 DEG APART |
| MATT | MATERIAL | OVERALL STEEL COMP 303 |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 1.1448 AND INCHES MAXIMUM 1.1458 |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.312 |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 10 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.125 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.125 |
| CWTR | HUB STYLE DESIGNATOR |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 01-517-3 | 23266 |
| 2JC3582H81 | 29399 |
| 2JC3582H81 | 95138 |
| 2JC3582H81 | 97942 |
| 610651-81 | 00141 |
| 2JC3582H81 | 06983 |