NSN 3020-00-089-8117 · NIIN 000898117 · FSC 3020
NO DASHES 3020000898117
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWWH | END NOMINAL LENGTH | SECOND END INCHES 0.120 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.120 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.1620 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.098 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 1.0680 |
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 0.5625 |
| AJLA | TEETH QUANTITY | 36 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.5932 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWWN | END NOMINAL DIAMETER | BOTH ENDS INCHES 0.1249 |
| CWWS | FIRST STEP NOMINAL LENGTH | BOTH ENDS INCHES 0.1200 |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 1.0680 |
| FEAT | SPECIAL FEATURES | UNDERCUT 0.010 IN. WIDE,0.124 IN. DIA,LOCATED 0.120 IN. FROM HUB ENDS |
| MATT | MATERIAL | OVERALL STEEL COMP 416 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763,CLASS 416,COND A |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL-F-14072,FINISH E300 |
| STYL | STYLE DESIGNATOR |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 438320-1 | 37695 |
| SM-C-619839 | 80063 |