NSN 3020-00-105-6080 · NIIN 001056080 · FSC 3020
NO DASHES 3020001056080
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.6450 |
| ANTP | BORE STYLE | |
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 2.5000 |
| AJLA | TEETH QUANTITY | 40 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.3750 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.0100 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.2500 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.6875 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.1590 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 0.4212 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | BOTH ENDS INCHES 1.2500 |
| FEAT | SPECIAL FEATURES | 2 CUTS 0.460 IN.MIN,0.480 IN.MAX RADIUS BETWEEN TEETH 180 DEG APART |
| MATT | MATERIAL | OVERALL STEEL |
| STYL | STYLE DESIGNATOR |