NSN 3020-00-118-3541 · NIIN 001183541 · FSC 3020
NO DASHES 3020001183541
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 1.1667 |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | AXIALLY THROUGH HUB FIRST END THREADED 1 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.500 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 4.312 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 28.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 1.277 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.911 |
| CWRM | FACE NOMINAL WIDTH | INCHES 2.124 |
| CWRS | BORE NOMINAL DIAMETER | COUNTERBORE FIRST END INCHES 0.125 |
| CWTB | COUNTERBORE NOMINAL DEPTH | COUNTERBORE FIRST END INCHES 3.148 |
| CWTG | COUNTERBORE NOMINAL DIAMETER | COUNTERBORE FIRST END INCHES 0.334 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 0.602 |
| FEAT | SPECIAL FEATURES | EXTERNALLY SPLINED HUB FIRST END,0.6563 IN.SPLINE PITCH DIA,21 SPLINES |
| MATT | MATERIAL | OVERALL STEEL COMP E9310 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE 6260 |
| STYL | STYLE DESIGNATOR | |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | AXIALLY THROUGH HUB FIRST END INCHES 0.375 |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 24 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 30.0 AND ROCKWELL C MAXIMUM 40.0 |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | AXIALLY THROUGH HUB FIRST END UNF |
| ANTP | BORE STYLE | |
| AJLA | TEETH QUANTITY | 7 |