NSN 3020-00-118-5954 · NIIN 001185954 · FSC 3020
NO DASHES 3020001185954
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJLA | TEETH QUANTITY | 24 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 2.6667 |
| ABSA | SPLINE QUANTITY | 12 |
| AAQL | BODY STYLE | |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 30.0 AND ROCKWELL C MAXIMUM 40.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 2.848 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.7500 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.438 |
| CWRB | BODY RECESS NOMINAL DEPTH | SECOND END INCHES 0.218 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.3125 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.313 |
| CWTB | COUNTERBORE NOMINAL DEPTH | SECOND END INCHES 0.218 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6260 |
| STYL | STYLE DESIGNATOR | |
| MATT | MATERIAL | OVERALL STEEL COMP E9310 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTG | COUNTERBORE NOMINAL DIAMETER | SECOND END INCHES 2.062 |
| BDTX | SPLINE PITCH DIAMETER | FIRST END INCHES NOMINAL 0.6000 |
| ANTP | BORE STYLE |