NSN 3020-00-118-7524 · NIIN 001187524 · FSC 3020
NO DASHES 3020001187524
In Stock
GEAR,INTERNAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 1.070 |
| CBBL | FEATURES PROVIDED | SPUR TEETH |
| CWTR | HUB STYLE DESIGNATOR | |
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 1.4380 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.320 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.260 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.813 |
| AJLA | TEETH QUANTITY | 69 |
| ANTP | BORE STYLE | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-5000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 34.0 AND ROCKWELL C MAXIMUM 38.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 2.2500 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.800 |
| STYL | STYLE DESIGNATOR | |
| MATT | MATERIAL | OVERALL STEEL COMP E4340 |
| SFTT | SURFACE TREATMENT | OVERALL PHOSPHATE |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 531500-1 | 70210 |