NSN 3020-00-119-9785 · NIIN 001199785 · FSC 3020
NO DASHES 3020001199785
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | TRANSVERSELY THROUGH HUB FIRST END PLAIN 2 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.787 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.781 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.199 |
| STYL | STYLE DESIGNATOR | |
| CWZK | MOUNTING HOLE NOMINAL DIAMETER | TRANSVERSELY THROUGH HUB FIRST END INCHES 0.078 |
| MATT | MATERIAL | OVERALL STEEL COMP E9310 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6260 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 1.6440 |
| AJLA | TEETH QUANTITY | 21 |
| ANTP | BORE STYLE | |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL A MINIMUM 81.0 AND ROCKWELL A MAXIMUM 84.0 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.082 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.500 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.588 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.172 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 0.345 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 1.016 |
| AAQL | BODY STYLE | |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |