NSN 3020-00-120-2434 · NIIN 001202434 · FSC 3020
NO DASHES 3020001202434
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.325 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.225 |
| AAQL | BODY STYLE | |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 0.245 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-5000 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STYL | STYLE DESIGNATOR | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 2.165 |
| CWNH | TOOTH FORM | STANDARD |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.560 |
| MATT | MATERIAL | OVERALL STEEL COMP E4340 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 34.0 AND ROCKWELL C MAXIMUM 38.0 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.096 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 2.0940 |
| AJLA | TEETH QUANTITY | 67 |
| ANTP | BORE STYLE | |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.394 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 532068-1 | 70210 |